Gardena-Fully Automatic Flower Box Watering The GARDENA Fully Automatic Flower Box Watering irrigates up to six metres of flower boxes, automatically. With the built-in timer with 13 fixed programmes, your flower boxes can be easily irrigated in your absence. For independence from the tap, the flower box watering can be operated directly from e.g. a rainwater tank. If more than six metres of flower boxes are to be connected, the set can be extended. For water-saving irrigation, the GARDENA Flower Box Watering can be connected to the GARDENA Rain Sensor electronic (Art. No. 1189-20) and the Soil Moisture Sensor (Art. No. 1188-20). Included in the set is a transformer with rotary switch for selecting the watering programme, a14 V low-voltage pump with dirt filter, 25 Inline Drip Heads (2 l/h) with end cap and cleaning needle, 10 m Supply Pipe 4.6 mm (3/16") and 15 Pipe Pegs.
Watering of the flower boxes is regulated by the computer; the water flow is automatically switched on and off. This is convenient and gives you more free time.
Immediately ready to use
Thanks to the comprehensive set, including a pump, it can be put into use right away.
Requirement based irrigation
The selection of 13 watering programmes allows optimal irrigation depending on the plant requirement.
Independent from the tap
The Fully Automatic Flower Box Watering functions independently of a tap, anywhere where there is a water reservoir, e.g. a rainwater tank, and where there is power supply.
Weather-dependent, water-sparing irrigation
If you connect a GARDENA Rain Sensor electronic or a Soil Moisture Sensor to the system, then soil moisture after rain will be considered. If it rains and the plants already have enough moisture, the irrigation is automatically stopped.